CALL DIRECT | +64 9 272 9953
WWW.SOLIDFLOORS.CO.NZ
INDUSTRIAL CONCRETE FLOOR POLISHING
AT HIPERTROWEL™ SPEED
Hipertrowel Floor Polishing System By Husqvarna
FOR A BETTER WAY OF WORKING
â„¢
If you own a business with a large commercial concrete floor, sometimes you need a faster polishing method than using a planetary floor grinder. Especially when you’re dealing with a really large, unobstructed area, where the surface flatness is already sufficient.
​
The Husqvarna Hipertrowel™ system is exactly the solution you’re looking for.
We combine our expertise in concrete floor polishing, our superior diamond tools and advanced driver technology for trowels to create a functional polished concrete floor obtained at the speed of ride-on trowel finishing.
​
Primarily an indoor application targeting large areas where surface flatness is already sufficient, such as warehouses and commercial spaces and flooring functionality is of primary concern.
The result is a hardwearing floor that offers a safer and cleaner environment. The minimal lifetime cost, low maintenance and high durability makes the Hipertrowel™ system of great benefit to any factory environment.
WHAT TYPE OF PROJECTS ARE SUITABLE?
WHAT END-RESULT CAN YOU PRODUCE?
The Hipertrowel™ method is ideal for industrial floors from 500 M2 and up. Both newly poured slabs and older, pre- existing floors can be processed with the Hipertrowel™ system.
HIPERTROWEL™ IS THE IDEAL SOLUTION WHEN
â– Time is the most critical parameter.
â– The surface is 500 m2 or more.
â– There are no obstacles (pillars etc.).
â– The floor does not need to be levelled.
â– No aggregate needs to be exposed.
â– Wet grinding is not an issue.
â– A good slurry management system is on site.
The Hipertrowel™ system allows you to produce a nicely salt and pepper-looking floor with a satin or glossy finish.
Hipertrowel™ is a complete concrete surface finishing system that enhances the strength and abrasion resistance of the floor while reducing maintenance and costs.
Hipertrowel™ uses superior diamond tools and advanced driver technology for trowels to create a functional polished concrete floor obtained at the speed of ride-on trowel finishing.
HOW DOES IT WORK?
The Hipertrowel™ method is a wet polishing process in six steps(#30G – #600G), and three optional final steps (#800G – #3000G). Depending on the conditions of the floor, initial grinding and grouting with a planetary grinder might be recommended.
â– Additional grit sizes are available
â– To optimise the result, polish with a Hiperclean TRW pad
â– For extra stain protection add Hiperguard™
TOOLS & EQUIPMENT
Solid Floors NZ will provide you with a complete setup of Hiperflex TRW tool pads, chemicals, Hipertrowel™ gyro drivers and power trowel attachments. You’ll also need a ride-on power trowel, a squeegee vacuum to collect the slurry and a water hose connected to a tap.
For maintenance, we highly recommend the Husqvarna Hiperclean pad.
WE ALSO PROVIDE
Hiperflex TRW Tool Pads
Hipertrowel™
Gyro Drivers
Hipertrowel™ attachments A, B or C for your ride-on trowel
Hiperhard™ + Hiperguard™ Chemicals
W70 P
â– Ride-on PowerTrowel (36 or 48 inch)
â– Pressurised Water Tap
â– Slurry Disposal Solution
â– Wall Protection Plastic Cover
â– Auto-Scrubber
Solid Floors NZ will provide you with a complete setup of Hiperflex TRW tool pads, chemicals, Hipertrowel™ gyro drivers and power trowel attachments. You’ll also need a ride-on power trowel, a squeegee vacuum to collect the slurry and a water hose connected to a tap.
For maintenance, we highly recommend the Husqvarna Hiperclean pad.
MULTI-ORBITAL ROTATION
The Hipertrowel™ gyro driver has a floating bearing mount that allows it to rotate independently of the trowel rotor. This solution enables a more efficient polishing process with a more consistent scratch pattern.
MAXIMUM FLEXIBILITY
Both the Hipertrowel™ gyro driver and Hiperflex TRW tool pads are designed for maximum flexibility in all directions. This allows the diamond tool pucks to follow the floor surface in the high and low spots and create a homogenous salt and pepper finish.
EVEN TOOL WEAR
The flexible polymer backing ring adjusts to unevenness of a floor and ensures an even wear on the pucks and ultimately a longer life of the tooling
OPTIMIZED TOOL DESIGN
The proven technology of the renown Hiperflex tools has been further developed to fit the demands of a ride-on power trowel.
For example, the number and position of the pucks are calculated to ensure optimal results and maximise tool life.
HASSLE-FREE MAGNETIC MOUNT
The Hiperflex TRW tool pads are easy to mount securely underneath the Hipertrowel™ gyro drivers due to strong magnets connecting the pads to the driver.
Economical Alternative To Epoxy Or Paint
Non-Dusting, Non-Marking Surface
Abrasion-Resistant
Durable & Hard Wearing
Minimal Lifetime Cost
New & Existing Concrete Floors Surfaces.
Existing Warehouse & Industrial Floors That Need Refurbishing.
Large Floor Polishing Jobs, Can Be Completed In Time & Cost Efficiencies, Compared To Traditional Concrete Polishing Methods.
Polished Floors That Have Stain Resistant & Nonslip Characteristics.
Can Upgrade To An Anti Microbial Solution, For Light Food Grade Areas.
LET'S GET STARTED
#1 INDUSTRIAL BUSINESS
FLOORING SOLUTION
If you own a New Zealand business that has a large industrial flooring space that needs a swift and decisive concrete polishing solution and would like to learn more about Hipertrowel, get in contact and have a chat with one of our experts.
All you need to do is click the button below to arrange a free initial phone consultation.
